The process of assembling the movement of a replica watch

replica watchesof the movement assembly process

A precision watch movement is a key component for a watch to function properly. Many watch enthusiasts like to collect high-end watches, many of which have exquisite movementsreplica watches. Today, we will learn about the assembly process of replica watch movements, as well as related knowledge and precautions.

1. Preparatory work

Before starting the movement assembly, you first need to be well prepared. Generally speaking, the following tools and materials are needed to install a watch movement:

• Watch movements
• Watch body and accessories
• Universal Screwdriver
• (dialect) earring
• electrostatic vacuum cleaner
• Gloves and mask (to prevent contamination of the movement)

2. Cleaning the movement

The movement needs to be thoroughly cleaned before you start assembling it. This is because there will be a lot of unwanted grease and dust on the movement, and if it is not cleaned, it will have a great impact on the life and accuracy of the movement. The steps for cleaning the movement are as follows:

• Clean the inside and outside of the movement with an electrostatic vacuum cleaner
• Remove the Plexiglas cover and accessories, then clean each part individually
• Put the accessories of the movement into the ultrasonic cleaning machine, clean it and take it out.
• Dry each part of the movement separately in a dryer.

3. Inspection of the movement

Before you start assembling, you need to check whether the movement is intact. Because the movement is very precise, sometimes there are minor damages which, if not found and repaired in time, will affect the service life and accuracy of the movement. Common things to check include:

• Check that the surface of each accessory is flat and smooth and free from damage and deformation. If there is damage, it needs to be replaced promptly.
• Check that all parts of the movement are tight. If there is looseness, it needs to be adjusted promptly.

4. Assembly of the movement

After cleaning and checking the movement, you can start assembling the movement. The steps for assembling the movement are as follows:

• Assemble the mainspring to the movement first.
• Integration of the movement's rotor and jacket into the movement
• Assembly of the oscillator and counterweight to the movement with minor adjustments
• Installation of the movement's winding and power reserve indicators

5. Adjustment of the movement

After completing the assembly, the movement needs to be adjusted to ensure its accuracy and stability. The steps for adjusting the movement are as follows:

• Adjust the frequency and amplitude of the oscillator to ensure the accuracy of the movement
• Adjustment of the three-point tolerance and the power reserve indicator to ensure the stability of the movement

6. Installation of the movement

After adjusting the movement, it is time to install the movement into the body of the watch. The steps for installing the watch movement are as follows:

• Putting the movement into position in the body of the watch
• Secure the movement in the body with a universal screwdriver and fine-tune it
• Attachment of other accessories such as mechanisms, date hands and dials to the main body
• Attach the strap and adjust the length and size of the strap to ensure a comfortable fit.

Above is the whole process of replica watch movement assembly. If you are a watch lover, you can also try to assemble a watch by yourself and feel the wonderful thing of the watch.