How to Tell a high-quality Watch from a Genuine One: Appearance, Quality, and Reputation

What is the difference between the appearance of a high-quality watch and a genuine one?

How to distinguish between replica watches and the real thing in the appearance of how to differentiate, a watch is good quality, but also to see how the credibility of its manufacturers, only a manufacturer can have a good reputation advantage, to be able to make it in the process of using the advantages of good quality, and then, the user to choose this watch also need to choose such a big manufacturer, because there will be a very good advantage of the strength of the production of the production of a good design for the watch, so that the watch has a good design, and the watch has a good appearance. The watch can have a good appearance advantage.Article from replica watches - /encyclopedia/63897/

Along with the development of super clone watches hair industry, more and more manufacturers to produce such watches, there are more and more users demand, the more manufacturers, the higher the price, some are cheap there is a high price, some high-priced super clone watches produced by the style and the genuine completely different, that is to say, this super clone watches can not find the genuine model, but with the genuine LOGO with the brand LOGO, this kind of super clone watches wear to play with a game. After all, not many people know, and the price of production out of several thousands of dollars, this super clone table in appearance and the original similar, but all aspects of the details are not enough in place, such as thickness, size, etc., the needle finger materials, etc., much less like the movement, basically similar to the genuine, but through the comparison there will be a gap between the kind, there is also a kind of appearance and the original is exactly the same, then where this is not the same? The movement is different, this kind of table has many styles, the appearance can be through the counter, but the movement is different, such as Cartier's blue balloon, Rolex's water ghost, and Omega and so on, can achieve this requirement.Article from replica watches - /encyclopedia/63897/

However, it will also make it a good cost-effective advantage in the process of using the watch when the price of the watch increases, while the watch of small manufacturers, although the price is lower, but it does not have the advantage of quality in the process of using the watch, or the appearance of a certain decline, but also make the service life of the watch is reduced.Article from replica watches - /encyclopedia/63897/

Whether it is the appearance or function is worth talking about, and there are professional consulting services and perfect after-sales service, you can completely rest assured that you can buy and be a fine product.Article from replica watches - /encyclopedia/63897/

Article from replica watches - /encyclopedia/63897/

What is the difference between the movement of a high-quality watch and an authentic one?Article from replica watches - /encyclopedia/63897/

As we all know, the core of a watch lies in its movement, which is like the heart of a human body. Whether the watch runs stably, keeps time accurately, stores enough, etc. are all directly related to the quality of the movement.Article from replica watches - /encyclopedia/63897/

Identifying the authenticity of a watch movement begins with the face of the movement.Article from replica watches - /encyclopedia/63897/

Some important parts of the movement, on the surface, easier to see on the clipboard such as: shock absorber. Commodity models are not the same, the level is not the same, low-grade common with a triangle shock absorber, replica watches see more. With INCBLOC better, and high-grade watches generally use KIF shock absorbers, such as: Rolex ROLEX, Vacheron Constantin, Patek Philippe, Audemars Piguet, etc., and then look more carefully will find that even if the use of the same shock absorber, its specifications are not the same. For example: OMEGA and TUDOR TUDOR are using ETA2892 core, while TUDOR is KIF, while OMEGA is INCBLOC. high-grade watches have the traditional practice of high-grade watches, usually using the combination of KIF shock absorber and worm-gear type precision adjustment structure (known as the "Ortest") is the symbol of high-grade watch movement. The hallmark of a fine watch movement is the use of at least an "off-center pin" fine-adjustment mechanism.Article from replica watches - /encyclopedia/63897/

How to recognize the movement of a watch? Look at the material workmanship of the movement.Article from replica watches - /encyclopedia/63897/

In addition, easier to see is the escapement wheel and escapement fork, the middle and low end of the use of copper escapement fork, escapement wheel and escapement fork surface are not smooth, high-level movement using steel escapement fork (due to the low specific gravity of steel), the escapement wheel and escapement fork surface are polished, the steel parts are polished, the core plate to do the trimming and grinding is the high and low watch movement is a major feature of the movement.

Balance wheel: the balance wheel of the senior dial must be golden, in fact, the balance wheel is made of different materials, the general watch wheel are used zinc-copper alloy (German silver), high-grade with beryllium alloy (BE) beryllium is an aerospace material, light and hard, the main reason is that the temperature of the linear expansion of the change is small, to ensure that the watch's accuracy.

How do you recognize the movement on a watch as genuine? Pay attention to the movement bridges for identification.

Many watches self-produced, such as: Guide, Movado, Omega OMEGA, Inergy ENICAR, Longines LONGINES, etc., are now mainly purchased with Swiss ETA movements to control costs. (There are many Swiss movement factories,ST,AS,FHF,F,but basically none now.)
The difference is RONDA (quartz watches), everyone uses ETA, and to differentiate, mainly engraves their markings on the automatic tourbillon. Since the automatic tourbillon is a dense metal, it cannot be stamped and engraved. With its own markings on the board, Cartier also uses ETA, but it has its own unique clipboard.

Also, mechanical watches will have a special set of letters on the edge of the balance position on the mainplate. Each table has its own label, so that it can be stored with another core and you can see it as well. Also, there are some brands of big watches that use ETA movements, but they are usually finished (polished) another time.

In addition, can also be named for their own movement number, such as Longines, Rado, Inergy, etc., for example, Inergy ETA2671, the movement back plate engraved with "AR770", which once issued an announcement, if there is no movement back plate. That is a replica watch!)

What is the difference between the craftsmanship of a high-quality watch and a genuine one?

Along with the development of the economy, people are pursuing high quality of life, and super clone watches as a kind of luxury goods have gradually entered people's lives. super clone watches, as shown in super clone watches, are still somewhat different from the real ones since they are said to be super clone watches. Then how to recognize the super clone watch and the real one?

1. Look at the movement

First, for the purchase of the watch brand used by the movement model and the movement of the logo must first understand clearly, for example, you want to buy the watch is permeable to the bottom, then understand the watch movement knowledge, so to see the authenticity of the words, it is much simpler, if it is not permeable to the bottom of the words, then this side is not very appropriate, the authentic movement engraving clear, beautiful, replica watches are rough, no beauty.

2. Look at the cover

The super clone watch cover is not made according to the brand due to cost and process, such as Omega, Audemars Piguet is to make the original screw cap into a gland, and there are octagonal or multiple screw backs on the model. And the replica watches are not produced according to the trademark back cover in order to save costs, because these costs are too high.

3. Look at the appearance

This point can look at the dial of the watch, the pointer can be seen, the pointer in the watch rarely do similarities, such as the pointer hanging at the pointer, the needle is not flat, poor brightness, the needle's angles are not clear and so on. Generally speaking brand hands are somewhat distinctive. The blurriness of the image does not completely cover the font, the best way to look at the dial is to take a magnifying frame to view it.

How to distinguish a super clone watch from a genuine one, for a watch lover, these are the common sense that must be mastered.